Downloads

Acoustic Performance

Configuration3-way, triamplified loudspeaker system
Frequency Response (-10 dB)50 Hz to 23 kHz
Frequency Response (-6 dB)56 Hz to 22 kHz
Nominal Coverage (-6 dB)90° x 60°
Maximum Peak SPL131 dB
Crossover Frequency

​LF: (overlapped) 100 Hz - 1 kHz, HF: 1.8 kHz

Directivity Index (DI)10 dB, >500 Hz
Directivity Factor (Q)10.0, >500 Hz

Transducer

LF Transducer1x12" Ferrite
MF Transducer8" CoActual™
HF Transducer1.75" compression driver

Amplifier

TypeClass D
Total Power Output2,000W (total power without protection algorithms and limiter enabled)
LF Power2 x 500W
MF Power500W
HF Power500W
Rated THD<0.05% (20 Hz - 20 kHz)
Dynamic Range119 dB (A-weighted)
Bandwidth20 Hz - 20 kHz
CoolingFree air convection

Connections and Controls

Input Channels 1 mic, 1 line
Input Connector Types1 XLR (F), 1 combo
Phantom Power15 VDC (Ch. 1 only)
Mic Input Impedance1 kΩ
Line Input Impedance10 kΩ
Maximum Input+22 dBu
Output Connector1 XLR (M) - Mix out
ControlsMic Level (Variable: Off to +48 dB), Line Attenuation (Variable: -24 dB to 0 dB), Speaker Attenuation (Variable: -24 dB to 0 dB)
Indicators

DSP Preset, HPF On/Off, Network Connected, Network Activity, Wi-Fi Setup, Wi-Fi On, Signal, Limit, Clip, Thermal

DSP

Contour PresetsNormal, LBR Source, Floor Monitor
HPF100 Hz, 4th-order Linkwitz-Riley
Bit Depth24-bit
Sample Rate96 kHz

Enclosure

MaterialEucalyptus Plywood
FinishChemline™ polyurethane
GrillePowder-coated steel
Dimensions (HxDxW)24.8" x 19.5" x 16.4"
(629.92 mm x 495.3 mm x 416.56 mm)
Unit Weight62 lbs (28.12 kg)
HandlesOne on each side
Monitor Angle50°

Safety

Amplifier ProtectionOver-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection4-ch. multi-threat limiter

Power

AC Power Input100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power)250W

Suspension Mounting

Rigging Points12 M10
Mounting35 mm, 2-position

Please see complete mechanical drawings when building a custom case.

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.