Acoustic Performance

Configuration2-way biamped
Frequency Response (-3 dB)55 Hz – 18 kHz
Frequency Response (-10 dB)50 Hz – 20 kHz
Nominal Coverage (-6 dB)110° x 50°
Maximum Peak SPL135 dB
Crossover Frequency1.6 kHz


LF Transducer1x12" Ferrite
Voice Coil Diameter2.5”
HF Transducer1.75" compression driver


TypeClass D
Total Power Output1,300W Peak (650 RMS)
LF Power1,000W Peak (500W RMS)
HF Power300W Peak (150W RMS)
CoolingFree air convection
Rated THD<0.05% (20 Hz - 20 kHz)
Dynamic Range119 dB (A-weighted)
Bandwidth20 Hz - 20 kHz

Connections and Controls

Input Channels1 mic/line, 1 line
Input Connector Types2 combo
Mic Input Impedance1 kΩ
Line Input Impedance10 kΩ
Maximum Input+22 dBu
Output Connector2 XLR (M): Mix out, Direct out
ControlsMic/Line Level
Preset Select
HPF On/Off
Front LED On/Off
IndicatorsDSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal


PresetsFOH, MON, DJ
HPF100 Hz, 4th-order Linkwitz-Riley
Bit Depth24-bit
Sample Rate96 kHz


MaterialEucalyptus Plywood
FinishChemline™ polyurethane
GrillePowder-coated steel
Dimensions (HxDxW)25.25” x 14” x 13.9” (641 mm x 356 mm x 353 mm)
Unit Weight52 lbs. (23.6 kg)
Handles2 (Top and Side)
Monitor Angle30°


Amplifier ProtectionOver-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protectionlimiter


AC Power Input100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power)150W

Suspension Mounting

Rigging Points12 M10
Mounting35 mm, 2-position

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.