Acoustic Performance

ConfigurationPowered subwoofer, ported
Frequency Response (-3 dB)45 Hz – 250 Hz
Maximum Peak SPL135 dB
Crossover Frequency90 Hz


LF Transducer1x18" Ferrite
Voice Coil Diameter4"


TypeClass D
Total Power Output2,000W Peak (1,000 RMS)
LF Power2 x 500W bridged (1000W total)
CoolingFree air convection
Rated THD<0.05% (20 Hz - 20 kHz)
Dynamic Range119 dB (A-weighted)
Bandwidth20 Hz - 20 kHz

Connections and Controls

Input Channels2 line
Input Connector Types2 combo
Line Input Impedance10 kΩ
Maximum Input+22 dBu
Output Connector2 XLR (M): Mix out, Direct out
ControlsOutput Level
Low Pass Filter
Preset Select
Polarity Invert On/Off
Mono On/Off
Front LED On/Off
IndicatorsDSP Preset, Polarity Invert On/Off, Mono On/Off, Front LED On/Off, Signal, Clip, Thermal


PresetsExtended LF
PolarityNormal or Reverse
Bit Depth24-bit
Sample Rate96 kHz


MaterialEucalyptus Plywood
FinishChemline™ polyurethane
GrillePowder-coated steel
Dimensions (HxDxW)22.5” x 25” x 24.5” (572 mm x 635 mm x 622 mm)
Unit Weight95 lbs. (43 kg)
Handles2 (One on each side)


Amplifier ProtectionOver-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protectionlimiter


AC Power Input100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power)150W

Suspension Mounting

Rigging Points12 M10
MountingGround stack provisions

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.