System Performance

Frequency Response (-3dB) * 54 Hz – 17 kHz
Frequency Range (-10dB) 45 Hz – 19 kHz
Recommended High-Pass 40 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6dB) Horizontal: 75 Degrees
Nominal directivity (-6dB) Vertical: 75 Degrees
Recommended Crossover Frequency 1.6k Hz (acoustic, active, external DSP)
RMS handling capacity ** LF: 200 W
HF: 60 W
Maximum SPL @ 1 Meter *** 124 dB ([WorxAudio] preset)


Components LF: 12” (304.8 mm) x 1
HF: 1” Exit (25.4 mm) x 1
Nominal Impedance LF = 8 ohms, HF = 8 ohms, Self Powered
Passive: 8 ohms


Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grill 16-gauge (.06 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Passive Version: Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors Self Powered Version: Neutrik® PowerCon (AC) XLR M/F (In/Out) or DANTE
Suspension/Mounting Internal bracket w/ threaded .375” Flying points (x12)
Dimensions 23.5” H x 18.25” W x 17.5” D (596.9 mm x 463.55 mm x 444.5 mm)
Net Weight 54 lb. (24.49 kg)
Shipping Weight 62 lb. (28.12 kg) - approximate with carton
Product Versions 12Ai-Passive, 12Ai-Powered
Digital Power Amp 1000W driving passive 8 ohm
Digital program processing
XLR I/O-DANTE enabled
AC powerCON I/O


* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.