The TrueLine X118S is designed to satisfy the need for an extreme high SPL sub bass loudspeaker system. Components have been selected solely for their performance.
The TrueLine X118S utilizes a direct radiating 18” 700W cone driver in a tuned enclosure, which provides maximum output with minimal distortion and smooth extended low frequency response. The tour tested 15 ply Baltic Birch highly braced enclosure and 18mm thick baffle board construction provide unsurpassed rigidity and strength.
Built to last.
The enclosure is built to truck pack dimensions for efficient transportation of multiple units, and should be arrayed to increase performance in large or outdoor venues. The TrueLine X118S is designed to be used for low frequency sections in multi-way speaker systems, or as a sub bass section in any sound system requiring extended low frequency response and the highest quality audio reproduction.
The TrueLine X118S comes with a multi-layered catalyzed Polyurea finish and is offered with a variety of color options. The TrueLine X118S delivers the transparent sonic quality and easy portability necessary for the demands of professional audio today.
- Extended Low Frequency
- High Level Output
- High Power Handling
- Low Power Compression
- Removable Caster Board
- Tour grade enclosure and mechanics
- Powder coated steel grill with a high transmission ratio
|Frequency Response (-3dB) *||35 Hz – 150 Hz|
|Frequency Range (-10dB)||30 Hz – 250 Hz|
|Recommended High-Pass||30 Hz – with minimum 24 dB / octave (4th order) Butterworth slope|
|Nominal directivity (-6dB)||Omni or cardioid|
|Recommended Crossover Frequency||90 Hz (acoustic, active, external DSP)|
|RMS handling capacity **||LF: 700 W|
|Maximum SPL @ 1 Meter ***||136 dB ([WorxAudio] preset)|
|Components||LF: 18” (457.2mm) x 1|
|Nominal Impedance||LF = 8 ohms, Self Powered|
|Enclosure||Baltic birch plywood, engineered plastics, and aluminum frame|
|Finish||Two-part spray catalyzed Polyurea coating on plywood|
|Grill||14-gauge (1.0 mm) perforated stainless steel, powder-coated finish, black|
|Environmental||Indoor use only|
|Connectors||Two (2) parallel-wired NL4 Neutrik® Speakon® connectors|
|Power Amp Connectors||Neutrik® powerCON (AC) XLR M/F (In/Out)|
|Suspension/Mounting||Internal bracket w/ threaded .375” Flying points (x16)|
|Dimensions||22.5” H x 24.5” W x 22.5” D (571.5 mm x 622.29 mm x 571.5 mm)|
|Net Weight||98 lb. (44.45 kg)|
|Shipping Weight||110 lb. (49.89 kg) - approximate with carton|
|Product Versions||X118i, X118i-P, X118T, X118T-P|
|Digital Power Amp||PDA-2000
1000W (x2) LF
Digital program processing
XLR I/O-DANTE option
AC powerCON I/O
|*||Frequency response and range measured on-axis with anechoic environment.|
|**||Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.|
|***||Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.|