Powerful, Clear, and Efficient.

The XL3 is a two-way, high efficiency, line array loudspeaker. It is designed as an all-in-one ultra compact high performance system for the reproduction of speech and music program material. The XL3 incorporates three (3) large format 1.4"” exit compression drivers coupled to a stabilized proprietary FlatWave Former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. The XL3 has a horizontal pattern of 160 degrees and a vertical of 20 degrees. Six (6) cone transducers coupled to the (A.I.M.) Acoustic Integrating Module minimizes comb filtering throughout the entire operating range.

Built to last.

The WorxAudio XL3's sturdy multi-ply plywood enclosure and multi-layered catalyzed Polyurea finish will withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the precise desired coverage area. Available in black or white exterior, the XL3 excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the XL3 an exceptional tool for any speaker system.

Key features:

  • All In One Line Array System
  • FlatWave Former (Wave Shaping Device)
  • DownFill Wave Former (Wave Shaping Device)
  • "AIM" Acoustic Intergrading Module
  • Tour grade enclosure and mechanics
  • Controlled Symmetrical Pattern

Images

Technical Specifications

System Performance

Frequency Response (-3dB) * 55 Hz – 18 kHz
Frequency Range (-10dB) 47 Hz – 20 kHz
Recommended High-Pass 60 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6dB) Horizontal: 160 Degrees
Nominal directivity (-6dB) Vertical: 20 Degrees
Recommended Crossover Frequency 1.2k Hz (acoustic, active, external DSP)
RMS handling capacity ** LF: 1200 W
HF: 450 W
Maximum SPL @ 1 Meter *** 139 dB ([WorxAudio] preset)

Transducers

Components LF: 8” (203.2mm) x 6, 2” (50.8) voice coil
HF: 1.4” Exit (35.56mm) x 2, 3” (76.2) voice coil
Nominal Impedance LF = 5.2 ohms, HF = 3.2 ohms, Self Powered
LF = 4 ohms, HF = 8 ohms, BiAmped x (3) modules

Physical

Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grill 14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors Neutrik® powerCON (AC) XLR M/F (In/Out) or DANTE
Suspension/Mounting Internal bracket w/ threaded .375” Flying points (x17)
Dimensions 31.1875” H x 24.5” W x 18” D (792.0 mm x 622.3 mm x 457.2 mm)
Net Weight 176 lb. (79.83 kg)
Shipping Weight 185 lb. (83.91 kg) - approximate with carton
Product Versions XL3i-BiAmp, X3i-Powered
Digital Power Amp PXD-2580
2500W (x1) LF, 800W (x1) HF
Digital (100) program processing, LCD readout
XLR Transformer Isolated I/O
AC powerCON I/O

Footnotes

* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.