Stadium Series Max Output 2-Way, Dual Outdoor Array

The S-XL2 has the same enclosure dimensions as our S-X2 and achieves the same impressive 160˚ horizontal dispersion pattern but increases power handling (and output SPL) with larger exponential horns. It excels in the most extreme weather environments, such as football and soccer fields, baseball stadiums, and amusement parks. The very broad dispersion reduces the quantity of enclosures needed to provide consistent coverage and minimize comb.

Using two 8-inch, 800W cone drivers and two 1.4-inch exit-diameter horns in a tuned enclosure, the S-XL2 provides a symmetrical coverage pattern, ensuring the sound has minimal distortion and smooth, extended low-frequency response. It is available as a passive system.

Super Wide Dispersion and High Output Outdoors

All enclosures are manufactured using Baltic birch cross-laminated wood and finished with a polyurea coating (inside and out), with UV exterior outdoor protection and a fiberglass seal coating inside and out. The stainless steel fasteners will maintain their appearance, while a stainless steel, perforated grille, backed with a vinyl mesh, completes each system.

Key features:

  • Specifically designed to withstand temperature extremes and moisture
  • Fiberglass seal coating and polyurea inside and out, with UV exterior outdoor protection
  • Two 1.4-inch exit-diameter horn-loaded compression drivers with 3-inch voice coils
  • Two 8-inch LF transducers with 2-inch voice coils
  • 800W LF, 300W HF power handling
  • 136 dB SPL max @1W/1 meter
  • 58 Hz to 18 kHz response (-3 dB)
  • 160˚ horizontal x 20˚ vertical directivity
  • Perforated, powder-coated, stainless steel grille with high transmission ratio
  • 16-foot, 4-conductor, Aquaseal water block cables with gland nuts; each module is wired separately, requiring four (4) power inputs
  • Internal bracket w/ threaded 0.375-inch ​flying points (x17)


Technical Specifications

System Performance

Frequency Response (-3 dB) * 58 Hz – 18 kHz
Frequency Range (-10 dB) 48 Hz – 20 kHz
Recommended High-Pass 60 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6 dB) Horizontal: 160°
Nominal directivity (-6 dB) Vertical: 20°
Recommended Crossover Frequency 1.2 kHz (acoustic, active, external DSP)
RMS handling capacity ** LF: 800 W
HF: 300 W
Maximum SPL @ 1 Meter *** 136 dB ([WorxAudio] preset)


Components LF: 8” (203.2 mm) x 4, 2” (50.8) voice coil
HF: 1.4” Exit (35.56 mm) x 2, 3” (76.2) voice coil
Nominal Impedance LF = 4 ohms, HF = 8 ohms, self-powered
LF = 4 ohms, HF = 8 ohms, biamped x (2) modules


Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grille 14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Outdoor Use
Connectors Weather-resistant gland nut w/ 16 ft cable
Suspension/Mounting Internal bracket w/ threaded 0.375” Flying points (x17)
Dimensions 21.375” H x 24.5” W x 18” D (542.92 mm x 622.3 mm x 457.2 mm)
Net Weight 119 lb. (53.97 kg)
Shipping Weight 125 lb. (56.69 kg) - approximate with carton
Product Versions S-XL2


* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.