Stadium Series 3-Module Outdoor Line Array

The weather-resistant S-XL3-20 achieves an impressive 160˚ horizontal dispersion pattern. It excels in the most extreme environments, such as football and soccer fields, baseball stadiums, and amusement parks. The very broad dispersion reduces the quantity of enclosures needed to provide consistent coverage and minimize comb filtering.

Using six 8-inch, 1,200W cone drivers and two 1.4-inch exit-diameter horns in a tuned enclosure, the S-XL3-20 provides a symmetrical coverage pattern, ensuring minimal distortion and smooth, extended low-frequency response. It is available as a passive system.

Super Wide Dispersion and High Output Outdoors

All enclosures are manufactured using Baltic birch cross-laminated wood and finished with a polyurea coating (inside and out), with UV exterior outdoor protection and a fiberglass seal coating inside and out. The stainless steel fasteners will maintain their appearance, while a stainless steel, perforated grille, backed with a vinyl mesh, completes each system.

Key features:

  • Compact line array with small footprint, stacked or flown
  • Two 1.4-inch exit-diameter, horn-loaded compression drivers with 3-inch voice coils
  • Six 8-inch LF transducers with 2-inch voice coils
  • Active version integrates PreSonus® WorxAudio® PDA-1000R 2-channel, Dante™-enabled power amplifier
  • Flat natural sound at high SPLs
  • Extremely wide (160˚) horizontal dispersion
  • FlatWave former for accurate 20˚ vertical dispersion
  • Acoustic Intergrading Module reduces comb filtering
  • Controlled symmetrical pattern for ultra wide stereo image and large audience coverage
  • Weatherized construction for demanding outdoor applications:
    • Designed to withstand temperature extremes and moisture
    • Sturdy multi-ply Baltic birch plywood enclosure
    • Multi-layered catalyzed Polyurea finish
    • Perforated powder coated steel grille with high transmission ratio
    • Fiberglass seal coating and polyurea inside and out, with UV exterior outdoor protection
    • 16-foot, 4-conductor, Aquaseal water block cables with gland nuts; each module is wired separately, requiring ​six (6) power inputs
  • TrueAim rigging employs high-strength aluminum and steel for fixed installation
  • Internal bracket w/threaded 0.375-inch ​flying points (x17)
  • Green: 89% efficient

Technical Specifications

System Performance

Frequency Response (-3 dB) * 55 Hz – 18 kHz
Frequency Range (-10 dB) 47 Hz – 20 kHz
Recommended High-Pass 60 Hz – with minimum 24 dB/octave (4th order) Butterworth slope
Nominal directivity (-6 dB) Horizontal: 160°
Nominal directivity (-6 dB) Vertical: 20°
Recommended Crossover Frequency 1.2 kHz (acoustic, active, external DSP)
RMS handling capacity ** LF: 1,200W
HF: 450W
Maximum SPL @ 1 Meter *** 139 dB (WorxAudio preset)

Transducers

Components LF: 8” (203.2 mm) x 6; 2” (50.8 mm) voice coil
HF: 1.4” Exit (35.56 mm) x 2; 3” (76.2 mm) voice coil
Nominal Impedance LF = 5.2Ω, HF = 3.2Ω, self-powered
LF = 4Ω, HF = 8Ω, biamped x (3) modules

Physical

Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grille 14-gauge (1 mm) perforated steel, powder-coated finish, black
Environmental Outdoor use
Connectors Weather-resistant gland nut w/16' cable
Suspension/Mounting Internal bracket w/threaded 0.375” flying points (x17)
Dimensions 31.1875” H x 24.5” W x 18” D (792.0 mm x 622.3 mm x 457.2 mm)
Net Weight 176 lb. (79.83 kg)
Shipping Weight 185 lb. (83.91 kg) - approximate with carton
Product Versions S-XL3-20

Footnotes

* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified (WorxAudio preset) and corresponding EQ settings.