Clear, Loud, Far, and Wide.

The X2 is a two-way, high efficiency, line array loudspeaker. It is designed as an all-in-one ultra compact high performance system for the reproduction of speech and music program material. The X2 incorporates two medium format 1”-inch exit compression drivers coupled to a stabilized proprietary FlatWave former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. The X2 has a 160 degrees horizontal by 30 degrees vertical pattern. Quad 8”-inch cone transducers coupled to the (A.I.M.) Acoustic Integrating Module minimizes comb filtering throughout the entire operating range.

Built to last.

The X2's multi-ply plywood enclosure and multi-layered catalyzed Polyurea finish will withstand the most demanding portable applications. A perforated, powder-coated steel grille with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the precise desired coverage area. The X2 is available in black or white exterior and excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the X2 an exceptional tool for any speaker system.

Key features:

  • All In One Line Array System
  • FlatWave Former (Wave Shaping Device)
  • DownFill Wave Former (Wave Shaping Device)
  • "AIM" Acoustic Intergrading Module
  • Tour-grade Enclosure and Mechanics
  • Controlled Symmetrical Pattern


Technical Specifications

System Performance

Frequency Response (-3 dB) * 58 Hz – 18 kHz
Frequency Range (-10 dB) 48 Hz – 20 kHz
Recommended High-Pass 60 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6 dB) Horizontal: 160°
Nominal directivity (-6 dB) Vertical: 30°
Recommended Crossover Frequency 1.6 kHz (acoustic, active, external DSP)
RMS handling capacity ** LF: 800W
HF: 150W
Maximum SPL @ 1 Meter *** 132 dB ([WorxAudio] preset)


Components LF: 8” (203.2 mm) x 4; 2” (50.8 mm) voice coil
HF: 1” Exit (25.4 mm) x 2; 1.75” (44.45 mm) voice coil
Nominal Impedance LF = 4 ohms, HF = 8 ohms, self-powered
LF = 4 ohms, HF = 8 ohms, biamped x (2) modules
Passive: 8 ohms x (2) modules


Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grille 14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors Neutrik® powerCON (AC) XLR M/F (In/Out) or DANTE
Suspension/Mounting Internal bracket w/ threaded .375” Flying points (x17)
Dimensions 21.375” H x 24.5” W x 18” D (542.92 mm x 622.3 mm x 457.2 mm)
Net Weight 109 lb. (49.44 kg)
Shipping Weight 115 lb. (52.16 kg) - approximate with carton
Product Versions X2i-Biamp, X2i-Passive, X2i-Powered
Digital Power Amp 500W (x2) LF, 500W (x2) HF
Digital program processing
XLR I/O-DANTE option
AC powerCON I/O


* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.