Powerful, Clear,
and Efficient.

The X5 is a two-way, high efficiency, line array loudspeaker. It is designed as an all-in-one ultra compact high-performance system for the reproduction of speech and music program material. The X5 incorporates five medium format, 1-inch exit compression drivers coupled to a stabilized proprietary FlatWave former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. The X5 has a horizontal pattern of 160 degrees and a vertical pattern of 40 degrees. Ten cone transducers, coupled to the (A.I.M.) Acoustic Integrating Modulem, minimize comb filtering throughout the entire operating range.

Built to last.

The WorxAudio X5's sturdy, multi-ply plywood enclosure and multi-layered catalyzed Polyurea finish will withstand the most demanding portable applications. A perforated, powder-coated steel grille with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the precise desired coverage area. Available in black or white exterior, the X5 excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the X5 an exceptional tool for any speaker system.

Key features:

  • Compact Line Array
  • FlatWave Former (Wave Shaping Device)
  • "AIM" Acoustic Intergrading Module
  • TrueAim Rigging (1° Increments)
  • Tour-grade Enclosure and Mechanics
  • Controlled Symmetrical Pattern
  • FIRmaker Beam Steering


Technical Specifications

System Performance

Frequency Response (-3 dB) * 55 Hz – 18 kHz
Frequency Range (-10d B) 45 Hz – 20 kHz
Recommended High-Pass 50 Hz – with minimum 24 dB / octave (4th order) Butterworth slope
Nominal directivity (-6 dB) Horizontal: 160°
Nominal directivity (-6 dB) Vertical: 40°
Recommended Crossover Frequency 1.6k Hz (acoustic, active, external DSP)
RMS handling capacity ** LF: 2000W
HF: 375W
Maximum SPL @ 1 Meter *** 143 dB ([WorxAudio] preset)


Components LF: 8” (203.2 mm) x 10, 2” (50.8 mm) voice coil
HF: 1” Exit (25.4 mm) x 5, 1.75” (44.45 mm) voice coil
Nominal Impedance LF = 5.2 ohms, HF = 3.2 ohms, self-powered
LF = 4 ohms, HF = 8 ohms, biamped x (5) modules


Enclosure Baltic birch plywood, engineered plastics, and aluminum frame
Finish Two-part spray catalyzed Polyurea coating on plywood
Grille 14-gauge (1.0 mm) perforated steel, powder-coated finish, black
Environmental Indoor use only
Connectors Two (2) parallel-wired NL4 Neutrik® Speakon® connectors
Power Amp Connectors Neutrik® powerCON (AC) XLR M/F (In/Out) or DANTE
Suspension/Mounting Internal bracket w/ threaded 0.375” flying points (x17)
Dimensions 48.75” H x 24.5” W x 18” D (542.92 mm x 622.3 mm x 457.2 mm)
Net Weight 250 lb. (113.39 kg)
Shipping Weight 265 lb. (120.20 kg) - approximate with carton
Product Versions X5i-BiAmp, X5i-Passive, X5i-Powered
Digital Power Amp PXD-2580
2500W (x1) LF, 800W (x1) HF
Digital (100) program processing, LCD readout
XLR Transformer Isolated I/O
AC powerCON I/O


* Frequency response and range measured on-axis with anechoic environment.
** Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.
*** Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.