Sorry! Sie haben die Sprache Deutsch ausgewählt, die aktuelle Seite steht aber nicht auf Deutsch zur Verfügung. Momentan wird die englische Version angezeigt.
2,400W of Rock-Solid Lows
The TrueLine V215S is designed to satisfy the need for an extreme high-SPL sub bass loudspeaker system. Components have been selected solely for their performance.
The TrueLine V215S utilizes dual direct radiating, 15-inch, 1,200W cone drivers in a tuned enclosure, which provides maximum output with minimal distortion and smooth extended low-frequency response. The tour-tested, highly braced, 15-ply Baltic birch enclosure and 15 mm thick baffle board construction provide unsurpassed rigidity and strength.
Built to last.
The enclosure is built to truck-pack dimensions for efficient transportation of multiple units and should be arrayed to increase performance in large or outdoor venues. The TrueLine V215S is designed to be used for low frequency sections in multi-way speaker systems, or as a sub bass section in any sound system requiring extend low-frequency response and the highest quality audio reproduction.
The TrueLine V215S comes with a multi-layered, catalyzed polyurethane finish and is offered with black and white color options. The TrueLine V215S delivers the transparent sonic quality and easy portability necessary for the demands of professional audio today.
- Dual direct-radiating, 15-inch, 1,200W cone drivers
- Extended low frequency
- High-level output
- High power handling
- Low power compression
- Removable caster board
- Tour-grade enclosure and mechanics
- Powder-coated steel grille with a high transmission ratio
|Frequency Response (-3 dB) *||35 Hz – 150 Hz|
|Frequency Range (-10 dB)||30 Hz – 150 Hz|
|Recommended Highpass||30 Hz – with minimum 24 dB / octave (4th order) Butterworth slope|
|Nominal directivity (-6 dB)||Omni or cardioid|
|Recommended Crossover Frequency||90 Hz (acoustic, active, external DSP)|
|RMS handling capacity **||LF: 2400W|
|Maximum SPL @ 1 meter ***||141 dB ([WorxAudio] preset)|
|Components||LF: 15” (381 mm) x 2|
|Nominal Impedance||LF = 4Ω, Self Powered|
|Enclosure||Baltic birch plywood, engineered plastics, and aluminum frame|
|Finish||Two-part spray catalyzed Polyurea coating on plywood|
|Grille||14-gauge (1.0 mm) perforated stainless steel, powder-coated finish, black|
|Environmental||Indoor use only|
|Connectors||Two (2) parallel-wired NL4 Neutrik® Speakon® connectors|
|Power Amp Connectors||Neutrik® powerCON (AC) XLR M/F (In/Out)|
|Suspension/Mounting||Internal bracket w/ threaded 0.375” flying points (x24)|
|Dimensions||18” H x 28” W x 30.0” D (457.2 mm x 711.2 mm x 762 mm)|
|Net Weight||136 lb. (61.68 kg)|
|Shipping Weight||146 lb. (66.22 kg) - approximate with carton|
|Product Versions||V215i, V215i-P, V215T, V215T-P|
|Digital Power Amp||PXD-2500
2500W (x1) LF
Digital (100) program processing, LCD readout
XLR M/F Isolated I/O
AC powerCON I/O"
|*||Frequency response and range measured on-axis with anechoic environment.|
|**||Power handling tested using pink noise filtered to meet IEC 268-5, 6 dB crest factor, 100 hours, with recommended EQ.|
|***||Peak level measured at 1m under free field conditions using 10 dB crest factor pink noise with specified ([WorxAudio] preset) and corresponding EQ settings.|